با کلیک بر روی 1+ ما را در گوگل محبوب کنید

شرکت صنعت کاران

فروش دستگاه جوش ، دستگاه جوش اینورتر

دستگاه جوش میگ مگ TPS 400i LSC ADVANCE

PS 400i LSC ADVANCED

The MIG/MAG TPS 400i LSC ADVANCED power source is primarily used in applications demanding increased process stability in the dip transfer arc and improved properties in the intermediate arc. The length of the interconnecting hosepack is irrelevant – whether short or long, the arc stability always remains the same.


Functional principle:
The built-in LSC ADVANCED module inside the power source guarantees that the inductivity generated in the hosepack is compensated for. This ensures a constant droplet detachment with little welding spatter in the dip transfer and intermediate arcs.


This result:

  • A precise, low-spatter welding process
  • Exact repeatability of the welding applications
  • The best weld properties and process stability, even with long hosepacks

 

 
Mains voltage 3 x 400 V
Max. effective primary current 16,4 A
Max. primary current 25,1 A
Mains fuse 35 A träge / slow-blow
Mains voltage tolerance +/- 15 %
Mains frequency 50 / 60 Hz
Cos Phi 0,99
Interface to a 230 / 400 V, 50 Hz public grid
Max. permitted mains impedance Zmax at PCC 92 mOhm
Interface to a 230 / 400 V, 50 Hz public grid
Recommended earth-leakage circiut breaker Type B
Welding current range MIG/MAG 3 – 400 A
Welding current range rod electrode 10 – 400 A
Welding current at 10min / 40°C (104°F) 40 % 400 A / 60 % 360 A / 100 % 320 A
Output voltage MIG/MAG 14,2 – 34,0 V
Output voltage rod electrode 20,4 – 36 V
Open circuit voltage 73 V
Degree of protection IP 23
Type of cooling AF
Overvoltage category III
Pollution level according to IEC60664 3
EMC emission class A
Safety symbols S, CE
Dimensions l x w x h 706 x 300 x 720 mm / 27.8 x 11.8 x 28.3 in.
Weight 55,7 kg / 122,8 lb
Max. shielding gas pressure 7,0 bar / 101.49 psi
Coolant Original Fronius