با کلیک بر روی 1+ ما را در گوگل محبوب کنید

شرکت صنعت کاران

فروش دستگاه جوش ، دستگاه جوش اینورتر

دستگاه جوش میگ مگ TPS 320i

TPS 320i

The TPS 320i, 320i C and 320i nc MIG/MAG power sources are completely digitised microprocessor-controlled inverter power sources. The modular design and potential for system add-ons ensure a high degree of flexibility. The devices can be adapted to any specific situation.


Functional principle:
The central control and regulation unit of the power sources is coupled with a digital signal processor. The central control and regulation unit and the signal processor control the entire welding process. During the welding process, the actual data is measured continuously and the device responds immediately to any changes. Control algorithms ensure that the desired target state is maintained.


This results

  • A precise welding process
  • Exact reproducibility of all results
  • Excellent weld properties.

 

 
Mains voltage 3 x 400 V
Max. effective primary current 12,3 A
Max. primary current 19,4 A
Mains fuse 35 A träge / slow-blow
Mains voltage tolerance +/- 15 %
Mains frequency 50 / 60 Hz
Cos Phi 0,99
Interface to a 230 / 400 V, 50 Hz public grid
Max. permitted mains impedance Zmax at PCC 95 mOhm
Interface to a 230 / 400 V, 50 Hz public grid
Recommended earth-leakage circiut breaker Type B
Welding current range MIG/MAG 3 – 320 A
Welding current range rod electrode 10 – 320 A
Welding current at 10min / 40°C (104°F) 40 % 320 A / 60 % 260 A / 100 % 240 A
Output voltage MIG/MAG 14,2 – 30,0 V
Output voltage rod electrode 20,4 – 32,8 V
Open circuit voltage 73 V
Degree of protection IP 23
Type of cooling AF
Overvoltage category III
Pollution level according to IEC60664 3
EMC emission class A
Safety symbols S, CE
Dimensions l x w x h 706 x 300 x 510 mm / 27.8 x 11.8 x 20.1 in.
Weight 35,0 kg / 77.16 lb
Max. shielding gas pressure 7,0 bar / 101.49 psi
Coolant Original Fronius